Start Living.
Seaport Aluminum Half Hitch Tool A handy tool for making half-hitch knots. Simply loop the thread around the tool, slip the eye of the hook into the open end, slide the loop off. Tighten. Repeat several times and cement off the know.
$3.49
Seaport Brass Half Hitch Tool A handy tool for making half-hitch knots. Simply loop the thread around the tool, slip the eye of the hook into the open end, slide the loop off. Tighten. Repeat several times and cement off the know. Solid brass for a lifetime of use.
$4.99
Seaport 3 1/2" Curved Scissors The 3 1/2 inch curved tip scissor is the same great scissor as the 3 1/2 inch straight scissor but with a curved tip. The curved tip is ideal for detail trimming and allows you to easily work around the fly without having to put your hand and arm in bizarre angles for trimming. Actual blade length is 1 inch, but actual length for cutting is likely the first 1/2 inch. Straight edge (non serrated) scissors. Pointed tip for access to tight places.
$4.99
Seaport 3 1/2" Straight Scissors The perfect tool for every day use. Actual blade length is 1 inch. The total scissor length is a short 3 1/2 inches long. Straight edge (non serrated) scissors. Pointed tip for access to tight places.
$4.99
Seaport 4" Straight Scissors For those tyers who prefer a slightly longer scissor. Actual blade length is 1 1/8 inch. The total scissor length is 4 inches long. Straight edge (non serrated) scissors. Pointed tip for access to tight places.
$4.99
Seaport 4" Precision Fine Tip Curved Scissors The perfect 4 inch scissor for fly tying! These scissors have an arrowhead point or precision fine tip. The tips are curved for access to tight places and difficult angles. The edge of the blades are serrated to help hold delicate material such as hackle fibers, tying thread, and even deer hair. Actual blade length is 3/4 inch, although you are likely to only use the first 3/8 inch in most cases.
$7.99
Seaport 4" Precision Fine Tip Scissors A wonderful 4 inch scissor for fly tying! These scissors have an arrowhead point or precision fine tip. The edge of the blades are serrated to help hold delicate material such as hackle fibers, tying thread, and even deer hair. This is a very real advantage over non-serrated blades especially when tying smaller sized flies. Actual blade length is 1/2 inch.
$7.99
Seaport Fine Tip, Straight Precision Tweezers
Fine tipped straight tweezers for delicate and precise work. Not ideal for holding or grabbing beads.
$3.99
Seaport Matarelli Style Revolving Whip Finisher The ideal whip finishing tool for bead headed flies! It is also great for any time you need to create a whip finish away from the hook eye. A must have on every fly tying bench.
$3.99
Seaport Large Thompson Whip Finisher Same as the regular Thompson whip finisher but larger for larger saltwater patterns are longer hackled flies.
$3.49
Seaport Thompson Whip Finisher A great whip finishing tool. Use this whip finishers if you want to keep hackles out of the way or if you are using a hackle guard. Also perfect for hair heads and small hackled flies, because it does not pack down the hair or hackle like a Matarelli whip finisher will. Not suited for bead headed flies. It will not allow you to maneuver around jig heads or lead eyes. It also is not great for flies that must be whip finished back away from the hook eye.
$2.99
Seaport Brass Handled Whip Finisher Same as the Thompson Whip Finisher but with a Brass handle for a lifetime of usage.
$3.99
Seaport  Fly Tying Tools
Start Living.
1-978-525-3303
Wingaersheek Flies is proud to
carry Seaport Fly Tying Tools.   
We both share similar beliefs
that good stuff doesn't have to
be expensive.
HMH Starter Tube Fly Tool
Works in any vise. Tool body precision built of stainless steel with brass fittings. Includes 2 stainless steel pins (.041" and .062" dia.) . Instructions included. 4 Starter tubes (2 large & 2 small) and some junction tubing included also. From HMH.
$24.95
HMH Premium Tube Fly Tool
Works in any vise. The difference between the Starter tool and the Premium tool are the tube fly pins. With the premium tool, the pins are tapered, finished and each end of the pin has a welded end cap. This allowes tubes to be moved closer to the end, creating a tight connection between the tube and the pin. From HMH.
$44.95
Seaport Dubbing Loop Tool The purpose of this tool is to hold the dubbing thread loop open for the easy placement of hard to handle materials. It then allows easy closure of this loop to keep those materials in place until they are securely spun in the thread. This tool spins marabou, coarse hair and hackle effortlessly. Unique double spring action allows tiers to reopen the tool and add more material
$1.99
Seaport Brass Handled Hair Spinner and Bodkin Two tools in one. A hair spinner on one end and a bodkin on the other. A brass handle in the middle allows for easy control and turning.
$1.99
Half Hitch Tools
Tube Fly Tools
Scissors
Previous tool page
Vises
A great scissor for cutting foam, crystal skin, no-fray or any other material to length. Actual blade length is 1 3/8 inch for nice long cuts. The total scissor length is 5 inches long. Straight edge (non serrated) scissors.
Seaport 5" Straight Scissor
$6.99
Brass Tube Fly Starter Tool
The best starter tool for tube flies! Simply attach the brass plate in the jaws of most vices. 3 different sized metal pins allow you to tie tubes of different thickness. Stopper heads on the pins allow a nice flush alignment.
$12.99
Vice Accesories
Whip Finishers
Wing Burners
Other Tools
Stonefly Wing Burner Set of 3
Create perfectly matched Stonefly wings every time. Simply place a feather or No-Fray material between the two leaves of the brass burner and burn the outer edges. These burners are 3 5/8 inch long and are made of solid brass. Set of 3.
$7.95
Caddisfly Wing Burner Set of 3
Create perfectly matched Caddis wings every time. Simply place a feather or No-Fray material between the two leaves of the brass burner and burn the outer edges. These burners are 3 5/8 inch long and are made of solid brass. Set of 3.
$7.95
Mayfly Wing Burner Set of 3
Create perfectly matched Mayfly wings every time. Simply place a feather or No-Fray material between the two leaves of the brass burner and burn the outer edges. These burners are 3 5/8 inch long and are made of solid brass. Set of 3.
$7.95
Small and convenient, this ingenious device is perfect for most situations. You no longer need to be outdoors to allow your UV products to cure. Perfect for fly-tying, the UV Mini Lamps allows UV Knot Sense, UV Wader Repair, UV Boat Patch or UV Fly Paint to cure instantly. It also is great for charging glow-in-the-dark items, like Bio-Glow. Batteries are included.
$12.99
Loon UV Mini Lamp
See the YouTube video on how to use the Turbo Spinning Block here:
http://www.youtube.com/watch?v=lo33eV5Yc-U
Download how to use instructions here:
Turbo Spinning Block Instructions
Foam Vise Rack
A nice inexpensive way to let your flies dry / cure. Simply place the foam rack on any vise. Slide your fly into any of the 16 slits. Flies dry and stays out of your way while tying. 2 foam holders per pack.
$3.50
Trim Bag
A nice size trim bag that fits easily onto your vise. Makes clean-up fast & easy. Keeps your work area clean and organized.
$9.99
HMH Starter Tube Fly Tool
Works in any vise. Tool body precision built of stainless steel with brass fittings. Includes 2 stainless steel pins (.041" and .062" dia.) . Instructions included. 4 Starter tubes (2 large & 2 small) and some junction tubing included also. From HMH.
$24.95
Whiting Hackle Gauge
Color
$19.99
Hareline Bead Pad
5 x 7.5 in.
A great new product by Hareline. This silicon based pad is perfect to keep your beads from running off your table or workspace. This pad holds beads nicely and allows for easy pick-up. Stop losing beads and spending time on your hands and knees looking for run-away beads. Pays itself back in no time!
$4.99
Jade River Turbo Spinning Block
The ultimate tool for making dubbing brushes, softdubs, CDC hackles and microcables. This is a very hot product! If you are into dubbing loops you will definitely want to have a closer look at this tool. The kit includes the spinning block and instructions for making dubbing brushes. Consider also getting copper or silver wire and some dubbing too!
$63.95